簡介
Brief Introduction
OLExS型連續脂質體擠出儀，主要解決脂質體、納米粒等物料顆粒大、穩定性差， 包封率低、溫度要求高、原輔料貴等問題，可對樣品粒子的大小和分布進行有效控制。 OLExS 型連續脂質體擠出儀具有快速操作、使用便捷、占地面積小等特點，為高校、企業脂質體研發創(chuàng )造有趣穩定的操作體驗。
OLExS Online Liposome Extrusion System is the latest liposome extruder developed by Suzhou Aitesen Pharmaceutical Equipment Co., Ltd. It mainly solves the problems of large particle size, poor stability, low encapsulation efficiency, high temperature control requirement and high cost of raw materials and accessories. It can effectively control the size and distribution of sample particles. OLExS Online Liposome Extrusion System has the characteristics of fast operation, convenient use and small size. It creates interesting and stable operation experience for the research and development of liposome Preparation in universities and companies.
擠出原理
Extrusion Principle
脂質體擠出的原理在于，通過一定的擠出動力源將脂質體樣品粒子進行擠壓，使其在一定壓力條件下通過PC濾膜， 此壓力作為粒子過膜過程中的剪切力可使其達到粒徑控制的效果。不論形態、大小和分布都可得到極大改善。
The principle of liposome extrusion is that the particles of liposome sample are extruded by a certain extrusion power source to pass through the PC membrane under a certain pressure. The pressure acts as the shear force in the process of the particles passing through the membrane, which can achieve the effect of particle size control. The shape, size and distribubtion can be greatly improved.
技術參數
Technical Parameter
| 型號 MODEL | OLExS-L | OLExS-PI | OLExS-Pd |
|
最高壓力 [psi] Maximum pressure[psi] |
25 | 25 | 15 |
|
最終產品粒徑 [nm] Final product size [nm] |
50~1000 | 50~1000 | 50~1000 |
|
單批處理量[ml] Single batch volume[ml] |
5~2000 | 5~3000 | 100~5000 |
|
最高產品濃度[mg/ml] Maximum product concentration[mg/ml] |
200 | 200 | 200 |
|
工作溫度范圍 Operating temperature range |
5~80℃ | 5~80℃ | 5~80℃ |
|
設備材質 Equipment material |
SS316L | SS316L | SS316L |
|
動力源類型 Power Source Style |
Piston Pump | Piston Pump | Piston Pump |
|
擠出盤直徑[mm] Extruder Diameter[mm] |
47 | 90 | 143 |
|
擠出盤數量 Extruder Number |
2 | 2 | ≥2 |
|
最大流量(ml/min) Max Flow(ml/min) |
200 | 200 | 200 |
|
流量連續可調 Flow rate continuously adjustable |
√ | √ | √ |
|
配有高低壓保護功能 High and low voltage protection |
√ | √ | √ |
|
流量設定誤差%（ml/min） Flow setting error%（ml/min） |
≤±1% | ≤±1% | ≤±1% |
|
流量重復性誤差%（ml/min） Flow repeatability error%（ml/min） |
≤1% | ≤1% | ≤1% |
|
壓力脈動（MPa） Pressure pulsation（MPa） |
≤0.2 | ≤0.2 | ≤0.2 |
|
壓力準確度（MPa） Pressure accuracy（MPa） |
≤0.1 | ≤0.1 | ≤0.1 |
智藥研習社官方微信
制藥在線官方微信
2006-2025 上海博華國際展覽有限公司版權所有（保留一切權利）
滬ICP備05034851號-57
